<code id="dbuji"><ol id="dbuji"><track id="dbuji"></track></ol></code>
    <td id="dbuji"></td>
    <table id="dbuji"><option id="dbuji"></option></table>
        1. Environmentally Friendly Fuel Installations

          Modular S pumps for containerised fuel units.

          In South Africa there are many infrastructure projects which require either temporary or semi-permament fuel intallations (usually diesel). DESMI Modular S pumps are used for these installations.,

          Fuel installations need to be:

          - Environmentally friendly
          - Portable
          - Easy to set up

          DESMI distributor in Southern Africa, Pumptec, has had a great deal of success in supplying Modular S pumps for containerized fuel units.

          ?

          The units are usually built with dimensions of standard freight containers, which allow them to be easily transported by road, rail or even ships to where they are needed.

          ?

          There are various designs available, but in general they usually consist of a tank section (to store the fuel in) and a compartment to house the pump, meters, valves etc.

          Because they are self-contained, any spills are retained in the container and will not contaminate the ground on which it is standing. The containers usually have two pumps, one for offloading from a tanker for storage inside the container, and another for pumping the fuel into trucks etc. For standardization purposes, both are usually the DESMI Modular S pumps.

          The perfect choice!

          The DESMI Modular S pump was selected because experience had shown that it is advisable to use a self-priming pump for the transfer of fuel from road tankers to storage, due to the amount of air experienced at the beginning (when hoses are empty) and the end of a load (when the tanker is sucked “dry”). In addition, the larger models (Modular S70 and above) have flanged connections, which is preferred. “The DESMI Modular S pumps have proved themselves to be reliable and easy to maintain because there are no adjustments or shims required to set internal clearances.

          ?

          Lastly, the reasonable pricing, large flow/head range and short delivery time have given us an edge over the competition” says Alan Bullock, Pumptec South Africa.

          “There are a number of manufacturers of these units in South Africa, but the reliability of the Modular S pumps has resulted in their being the most popular choice for all the local manufacturers.”.

          ?

          More than just a standard pump!
          The Modular S pumps themselves are standard. However, two small changes have been made:

          • Mechanical seal is upgraded to carbon/tungsten carbide with Viton elastomer
          • The flaps are removed from the pumps when there is a flooded suction.

          Global Contacts

          DESMI is a global company

          Find address and contact information of our global locations

          国产一级a片无码免费欧